Key points of choosing plywood

2022-07-22
  • Detail

When selecting materials for decoration, the purchase of plates is a very important step. Plywood is required for the decoration of furniture, hanging cupboards, wall panels, solid wood doors, etc. in the room

when selecting materials for decoration, the purchase of plates is a very important step. Plywood is required for the decoration of furniture, hanging cupboards, wall panels, solid wood doors, etc. in the room. Plywood is a three-layer or multi-layer plate-like material made of wood segments that are spun into veneers or planed into thin wood, and then glued with adhesives. In the face of various categories in the building materials market, which are difficult to distinguish between good and bad, consumers should buy Plywood with good quality, low price and applicability according to the following points:

sonda plate

specification and quality:

the origin of plywood in the market is roughly divided into three categories: imported plate, joint venture plate and domestic plate. The common specifications mainly include 1220 & times; 2440× 3 mm, 1220× 2440× 5 mm; Other specifications include 1220× 1830× 3 mm or 5 mm; And 915× 1830× 3 mm or 5 mm. There is also a special door, {todayhot} specification is 915× 2135× 3 mm, 1220× 2135× 3 mm. Other plywood specifications are small format plywood, which is not commonly used for decoration. Multilayer plywood refers to more than 7 and 9 layers, which are mainly used for construction and vehicles. It is very important to find out the specification and size of plywood when purchasing plywood. Consumers can reasonably calculate the amount of materials required according to the area of indoor decoration. Five plywood can not be used where three plywood should be used, so as to avoid unnecessary waste caused by blind purchasing

the imported Eucalyptus big three plywood has a large amount of decoration in the market. Imported from Indonesia “ Printing plate ”, Imported from Malaysia “ Horse board ”. The former is better in quality than the latter, but the price is 2 to 3 yuan higher each. The big three plywood imported from the Chinese market is mainly BB and CC grade, and AA grade is rare. In the market, some operators fake imported boards with joint-venture boards of slightly better quality, or fake high-grade boards with low grades. Consumers can identify them by observing the outer packaging. Generally, the outer package of imported plywood is printed with import marks, indicating the origin of import in English: Indonesia, Malaysia, Indonesia, and English brand

in recent years, China's plywood industry has also developed greatly. The quality of joint venture plywood produced by some joint venture factories is about the same as that of imported plywood, and the price is slightly lower than that of imported plywood. When shopping, {hottag} must pay attention to the panel quality to see whether to use imported eucalyptus veneer. In addition, for each plywood, it is necessary to see whether there is bubble degumming, whether there is a large gap in the core board, whether the color and luster of the panel are consistent, whether there are cracks, insect holes, bumps, stains, defects, and too large repair sticker

link: yajiaju, Millennium boat, rabbit baby series boards are cost-effective and environmentally friendly

宁波妇科医院

深圳不孕不育医院

邯郸男科医院

Copyright © 2011 JIN SHI